

uvex high visibility jacket
article number: 17133
- certified heat and flame protection, plus maximum arc flash protection and weld protection
- single-layer material composition
- electrostatic discharge
- highly visible, even in poor light
- colour: signal yellow
uvex high visibility jacket – visible and safe at all times
This modern protective clothing protects the wearer against direct danger from heat, flames and arc flashes – but especially from the risk of not being seen in bad lighting conditions.
General features
- multifunctional high-visibility jacket with arc flash protection and the highest visibility level
- fastening with double-concealed zip and additional velcro fastener, two breast and side pockets with snap fasteners, one inside pocket with snap fastener
- single-layer material composition
- available sizes: 40/42 to 64/66, 90/94 to 106/110
- colour: signal yellow
- material: 49 % PPAN-FR, 42 % cotton, 5 % para-aramid, 3 % polyamid, 1 % carbon with inherently flame-retardant finish, single-layer (surface weight: approx. 300 g/m²)
Protection features
- certified class 1 arc-fault protection (in conjunction with EN 61482-1-2:2007)
- certified class 1-A1 welding protection (EN ISO 1611:2007)
- certified heat and flame protection (EN ISO 11612:2008)
- highest visibility class X2 (EN ISO 20471:2013)
- electrostatic discharge
Comfort features
- ergonomic stretch inserts in the rear shoulder area
- width-adjustable cuffs with snap fastener
Washing instructions
- wash at 60°
- do not bleach
- tumble-dry at low temperature (gentle)
- iron at low temperature
- dry clean with perchlorethylene
- suitable for industrial laundry
Areas of application
- working on public electrical systems, energy suppliers (protection against arc flashes, heat and flames; hi-vis)
Downloads
Specifications uvex high visibility jacket
Attribute | Value |
---|---|
PPE category | III: protection against lethal hazards and irreversible damage to health |
Clothing type | protective clothing |
Collection | uvex protection mulitfunction + high-vis |
Standards | EN 1149:2008: elektrostatisch ableitfähige Kleidung, EN ISO 11611:2007: Schutzbekleidung für Schweißen und verwandte Verfahren, EN ISO 11612: Schutzbekleidung für hitzeexponierte Arbeiter, EN ISO 20471: Warnbekleidung, EN 61482-1-2:2007: Schutzbekleidung gegen die thermischen Gefahren eines elektrischen Lichtbogens, IEC 61482-2:2007: Schutzbekleidung gegen die thermischen Gefahren eines elektrischen Lichtbogens |
Heat and flame protection | EN ISO 11612:2008 – A1, EN ISO 11612:2008 – B1, EN ISO 11612:2008 – C1, EN ISO 11612:2008 – F1 |
Welding protection | EN ISO 11611:2007 – class 1-A1 |
Arc-fault protection | EN 61482-1-2 – class 1: 4 kA/0.5 s, EN 61482-1-2 – class 2: 7 kA/0.5 s |
Electrostatic discharge capacity (anti-static) | EN 1149-3:2008: test method for measuring charge decay, EN 1149-5:2008: performance requirements for material and construction |
Material | Single-layer, 49 % PRAN-FR, 42 % cotton, 5 % para-aramid, 3 % polyamide, 1 % carbon |
Surface weight | approx. 300 g/m² |
Colour | Hazard yellow |
Size | 40/42 to 64/66, 90/94 to 106/110 |
Damit unsere Schutzbekleidung und Workwear zu Ihren Anforderungen passt wie angegossen, bieten wir Ihnen mit uvex add-on die Möglichkeit, Bekleidungsstücke mit Ihren Logos und Emblemen zu individualisieren – oder mit zusätzlichen Funktionen auszustatten. Mögliche Erweiterungen sowie Emblem-Positionen und -Größen im Detail:
Art | maximale Größe | Position |
---|---|---|
Stickemblem FR | 10 x 10 cm | Vorderteil |
Stickemblem FR | 25 x 9 cm | Rückenteil |
Namensschild | 10 x 2 cm | Vorderteil |
Transfer FR | 10 x 10 cm | Vorderteil |
Transfer FR | 14 x 14 cm | Rückenteil |
Emblempositionen:
Fragen zum Produkt?
Für weitere Informationen wenden Sie sich gerne an:
UVEX SAFETY Textiles GmbH
Robert-Schumann-Straße 33
08236 Ellefeld
Germany
Telephone: +49 3745 740-0
Fax: +49 3745 6109
Mehr Funktionen? Ihr eigenes Logo?
Erfahren Sie mehr über mögliche Funktionserweiterungen und individuelle Emblem-Optionen unserer Textilien: