DIN EN 352 – hearing protection equipment

Standard DIN EN 352 regulates general requirements for hearing protection as part of protective workwear.

Selection of appropriate hearing protection in accordance with DIN EN 352 depends on the specific working conditions and the type of noise occurring at the workplace. Requirements for hearing protection are regulated accordingly and classified into the following types:

  • earplugs
  • earmuffs
  • hearing protection helmets
  • noise protection suits

In addition to the general requirements in accordance with DIN EN 352, product-specific features and requirements are regulated in the following special standards.

In accordance with DIN EN 352, all hearing protectors must be marked with:

  • manufacturer's name or trademark and model name
  • EN number
  • instructions on insertion, application and wearing (as necessary)
  • nominal size
  • CE marking
  • indication of reusability or single use (relevant for earplugs)
  • left or right marking (for otoplastics)

DIN EN 352-1 – Earmuffs

Earmuffs in accordance with standard DIN EN 352-1 are defined as hearing protectors that enclose each of the wearer's external ears with a functional capsule. As it is often desirable to frequently put on and take off ear protection in areas with variable noise exposure, earmuffs are recommended for such environments.

The various sections of standard DIN EN 352-1 on earmuff requirements also regulate:

  • requirements for earmuffs attached to industrial safety helmets (part 3)
  • safety requirements and tests of level-dependent earmuffs (part 4)
  • safety requirements and tests on earmuffs with active noise compensation (part 5)
  • safety requirements and tests on earmuffs with communication devices (part 6)

DIN EN 352-2 – Earplugs

DIN EN 352-2 defines earplugs as all hearing protectors that are worn directly in the auditory canal or ear cavity.

According to the regulations, use of earplugs is recommended:

  • for continuous noise (lower frequencies)
  • when earmuffs tend to cause strong sweating
  • when also wearing safety spectacles
  • when wearing other protective equipment such as head protection, respiratory protection, face protection
  • together with earmuffs for brief periods of extreme noise

While the general requirements for earplugs are regulated in DIN EN 352-2, part 7 describes the safety requirements and tests for level-dependent earplugs.

DIN EN 352-3 – Earmuffs attached to industrial safety helmets

Standard DIN EN 352-3 describes all earmuffs that are directly attached to industrial safety helmets.

Signal detection marking

In a calculation method carried out by the institution for statutory accident insurance and prevention, hearing protection products can be categorised as particularly suitable to specific areas of application.

These comments are defined as follows: